In today’s digital age, the security of residential as well as commercial premises has the utmost significance. In this scenario, a range of camera surveillance systems enter the game. Among the myriad of cameras, the Zmodo camera heads the list. However, the Zmodo camera is one of the trustworthy options for protecting confidential data, but in spite of that, you have to face the Zmodo camera blinking green light issue.
Simply put, the Zmodo surveillance system is an integral component of the security strategy. When its LED lights indicate a green color code, it shows that the camera is ready for setup. Zmodo camera green light means that it will not send out any notifications and recordings to your mobile device.
If you really have the desire to sort out this issue, explore this blog post. Once you go through this blog post, you will definitely be able to resolve the green light issue on your Zmodo camera and deter crimes as well as provide evidence in case of incidents.
Let’s get started!
Key Reasons For Zmodo Camera Blinking Green Light Issue
Is your Zmodo camera showing a green light? Well, there can be several reasons responsible for this. The green light on your Zmodo indicates a few specific conditions. Here in this section, we have outlined all of the potential reasons for this, let’s have an eye on them.
Ready for Setup:
- When your Zmodo camera blinks green, it means the camera is ready for setup.
- At this point, the camera won’t send notifications or recordings to your phone.
- It’s prompting you to configure it properly before it becomes fully operational.
Power Issues:
- If the LED light is solid green, it usually indicates a power issue.
- The camera might not be able to enter setup mode (blinking green) or connect (solid blue).
Pairing Mode:
- The blinking green light also signifies that the Zmodo doorbell is in pairing mode.
- During this phase, it awaits connection to your network or app.
- Once paired, it will function as intended.
Troubleshooting Tips To Resolve Zmodo Camera Green Light Problem
Are you encountering a Zmodo camera green light issue? If some, to get rid of this frustrating problem, you have to dig a little deeper into the troubleshooting tips given below. One thing that is a must for you to know is that the Zmodo camera reset is the one-step solution to resolve the green light issues with your Zmodo camera. So, let’s know the process to reset the Zmodo camera and follow the instructions following-
Check Wi-Fi Signals:
Whenever your camera starts blinking green, it is necessary for you to cross-check the already available Wi-Fi signals on the Wi-Fi settings page of your smart mobile device. The steps to follow for this-
- First of all, look for the ZMD_SAP network in the list.
- In the next step, use the Zink connection to connect the device to your Wi-Fi network.
- Finally, if you can’t find zmd_sap, consider connecting to Zmodo’s chat support to speak with one of their agents.
Reboot and Verify Connections:
- Unplug the camera’s power source.
- Wait for about 10 seconds.
- Plug it back in.
- Now, make sure that your camera is directly connected to a wall outlet. For this, avoid power strips or extension cords.
- Check if the blinking green light persists.
Check SSID (Wi-Fi Network Name):
If the status light continues to blink green, consider the following:
- Remove special characters and spaces from your Wi-Fi network name (SSID), for instance-“$” or “!”.
- Ensure that the SSID complies with standard naming conventions.
- If the status light is solid blue, it means the device has already connected to the Wi-Fi network
Zmodo Camera Reset
If none of the troubleshooting methods enable you to sort out the green light issue with your Zmodo camera, you can reset your Zmodo camera. Let’s follow the given steps –
Locate the Reset Button:
- Some Zmodo cameras have a small RESET button.
- Look for it on the camera (usually on the side or bottom).
Press and Hold the RESET Button:
- Use a paperclip or a similar tool.
- Press and hold the button for about 10-15 seconds.
- The camera will turn off during this time.
Release the RESET Button:
Once the camera is back online, release the button.
Reconfigure the Camera:
- The camera is now reset to factory settings.
- You’ll need to reconfigure it by setting up the network and other device options.
Conclusion
Hopefully, after taking a dive into the information given above, you will become familiar with the main factors responsible for the Zmodo camera blinking green light issue. Apart from this, you may have acquired the strength to tackle this annoying issue forever.
Now, you will surely have an idea about why the Zmodo camera is one of the most prominent choices for businesses to enhance their security measures. So, it’s entirely up to you how far you achieve success in solving the Zmodo camera green light issue. As a result, it will become quite easy for you to provide the employees and customers with complete protection from the evolving crimes.