Want to connect Zmodo camera to wifi? Well, it is very easy to connect your cameras to a new wifi network. If you want to connect your Zmodo cameras to a new network, you don’t have to go through the setup entirely. You just have to go to the wireless settings in the Zmodo app on your mobile and walk through the configuration.
It is important that you keep your cameras connected to a wifi network across the clock. Else, you won’t be able to access your camera or view the live video feed of your Zmodo cameras. In case you see your Zmodo camera not connecting to wifi; don’t worry. We will also discuss that part in this post.
This post will walk you through the steps to connect your Zmodo camera to a new wifi network. Make sure you go through this post till the end in order to avoid missing out on anything important. So let’s get started with the Zmodo camera setup with a new network.
Connect Zmodo camera to wifi (NEW)
Most people disconnect their cameras from the old network and want to connect to a new network after changing their residence or the operator. So in this section, we will learn how to connect Zmodo camera to new wifi network without going through the fuss.
- First of all, open the Zmodo app on your smartphone or tablet.
- Once you open the app, go to the Zmodo camera settings page.
- After that, tap “Network” and then tap “WiFi Settings”.
- Thereafter, you will be redirected to the wireless settings page of your Zmodo camera.
- You will be prompted to connect to a new wifi network.
- Locate your network’s SSID from the list and tap it to enter the password.
- Enter the password correctly and then click Connect. The password field is case-sensitive so make sure you enter the password in an accurate way.
- At last, tap Save and your Zmodo cameras will reboot.
The Zmodo camera reboots in order to make the new changes take place on it. If you interrupt your cameras during the reboot, you may face connectivity issues later. So we recommend you avoid any interruption to your cameras during the configuration and reboot.
Why is Zmodo camera not connecting to WiFi?
If you see your Zmodo camera not connecting to wifi network. It means the settings are changed on your network or the camera. Make sure you do not use any third-party apps to configure or set up your Zmodo cameras. Also, make sure you enter the correct pre-shared key or wifi password on the wireless settings page.
The most important thing – make sure the Zmodo camera is not placed far away from your router. If the cameras are installed far away from your router, they may experience low network signals or frequent drop-offs on your network. It is important that you keep your cameras a little close to your router. Moreover, you should also make sure the router is set up and configured in the best way possible. If the router is not configured properly, it may experience low wifi coverage and again your cameras may encounter issues.
Bottom line
To connect Zmodo camera to wifi network, you can use the Zmodo app on your smartphone or tablet. Once you open the app, just follow the aforementioned instructions carefully.
So this post was all about how to connect Zmodo camera to new wifi network. We hope you liked this post. If you face any issues with your cameras or network, please feel free to reach out to our support team for further assistance.